Eaton Powerware 9390 Specifications download pdf (Page 29)

Installing the IAC

3-9

EATON Powerware

9390 IAC-B and IAC-T Installation and Operation Manual S 164201590 Rev C powerware.com

NOTE Two cabinet joining brackets are provided in the field kit for securing each

cabinet at the top and bottom. A small flat bracket joins the top of the cabinets and a

larger flat bracket joins the cabinets at the bottom. The small flat bracket is attached to

the cabinet tops first.

29. Locate the small flat bracket from the field kit. Align the holes in the small flat

bracket over the door hinge screw holes. Replace the screws in the hinges,

securing the bracket to the cabinets (see Figure 3-6).

30. Locate the large flat bracket from the field kit. Place one end of the bracket over

the bolt on the bottom side of the lower right-hand hinge on the UPS cabinet and

the other end over the bolt on the bottom side of the lower hinge on the IAC (see

Figure 3-6).

31. Securethebrackettothehingeswiththelargenutsfromthefieldkit.

32. Proceed to paragraph 3.3.2.

Top View with Small Bracket

Front View with Large Bracket

Existing Screws

Bracket

from Kit

Nuts from Kit

Existing HingeExisting Hinge

Bracket from Kit

UPS IAC

Figure 3-6. 100–160 kVA UPS to IAC Joining Brackets

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 145 146

No comments

Eaton Powerware 9390 Specifications Page 29