Eaton Powerware 9390 Specifications download pdf (Page 28)

Installing the IAC

3-8

EATON Powerware

9390 IAC-B and IAC-T Installation and Operation Manual S 164201590 Rev C powerware.com

Top View with Small Bracket

Existing

Screw

Bracket

from Kit

M4 S crew and

Four Washers

from Kit

UPS IAC

Front View with Large

Angle Bracket

Nut from Kit

Existing Hinge

M4 Screws

from Kit

Bracket from Kit

UPS IAC

Figure 3-5. 40–80 kVA UPS to IAC Joining Brackets

24. Locate the large angle bracket, M4 screws, and large nut from the field kit. Place

one end of the bracket over the bolt on the bottom side of the lower hinge on the

IAC, and loosely secure the bracket to the hinge with the large nut (see

Figure 3-5).

25. Align the holes in the other end of the bracket with the holes in the bottom

right-hand side of the UPS (see Figure 3-5). Secure the bracket with the M4 screws

from the field kit.

26. Secure the large nut on the IAC hinge.

27. Proceed to paragraph 3.3.2.

28. Remove the right-hand screw from the top right-hand door hinge of the UPS

cabinet and the left-hand screw from the top left door hinge of the IAC.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 145 146

No comments

Eaton Powerware 9390 Specifications Page 28