Eaton Powerware 9390 Specifications download pdf (Page 20)

IAC Installation Plan and Unpacking

2-4

EATON Powerware

9390 IAC-B and IAC-T Installation and Operation Manual S 164201590 Rev C powerware.com

3. Set the pallet on a firm, level surface, allowing a minimum clearance of 3m (10 ft)

on each side for removing the cabinet from the pallet.

NOTE

The IAC is shipped with a debris shield covering the ventilation grill on top of

the unit. Do not remove the debris shield until installation is complete.

4. Remove the protective covering from the cabinet.

5. Remove the packaging material, and discard or recycle in a responsible manner.

6. Inspect the contents for any evidence of physical damage, and compare each item

with the Bill of Lading. If damage has occurred or shortages are evident, contact

your Eaton service representative immediately to determine the extent of the

damage and its impact upon further installation.

NOTE

While waiting for installation, protect the unpacked cabinet from moisture, dust,

and other harmful contaminants. Failure to store and protect the IAC properly may

void your warranty.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 145 146

No comments

Eaton Powerware 9390 Specifications Page 20