Eaton SPI9000 User Manual download pdf (Page 55)

Menu Information

9000X AF Drives MN04001004E—May 2011 www.eaton.com 45

Operate Menu (M8)

The Operate Menu provides an easy-to-use method of

viewing key numerical Monitoring Menu items. Some

applications also support the setting of reference values in

this menu. The items displayed vary by application. The table

below is an example for the standard application.

Operate Menu Items—Standard Application Example

The menu is navigated by using the left and right arrow

buttons. If a reference level is available for setting, the up

and down arrow buttons adjust the value. To exit the

Operate Menu to access the other menus, depress the

ENTER button for 2 seconds. While in the other menus, if

there is no keypad activity, the display will return to the

Operate Menu after 30 seconds. The figure below illustrates

the Operate Menu button function.

Operate Menu Navigation

Code Signal Name Unit Description

O.1 Output frequency Hz Output frequency

O.2 Freqreference Hz Frequency reference

O.3 Motor speed rpm Calculated motor speed

O.4 Motor current A Measured motor current

O.5 Motor torque % Calculated torque based on nominal motor torque

O.6 Motor power % Calculated power based on nominal motor power

O.7 Motor voltage V Calculated motor voltage

O.8 DC bus voltage V Measured DC bus voltage

O.9 Unit temperature °C Heatsink temperature

O.10 Motortemperature % Calculated motor temperature based on the motor nameplate

information and the calculated motor load

R1 Keypad reference Hz Keypad frequency reference setting

One Touch Operate Menu

Navigation

Freq Ref Up

Password ?

Freq Ref Down

Exit Operate Menu by navigating

to Programming display and

pressing ENTER button or simply

press ENTER button 2 seconds.

Acknowledgement password

Monitor Display

Navigation Left

Monitor Display

Navigation Right

Programming Menu

Note!

Up and Down arrows are defaulted to

frequency reference. Some applications

also support other references like

Torque or PID. The active reference is

selected with a parameter

Display will automatically

return to default Operate

Menu monitor display

after 30 sec. delay.

or time delay

M1 Parameters

M2 Keypad Control

M3 Active Faults

M4 Fault History

M5 System Menu

M6 Expander Boards

M7 Monitor

Return to Operate

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 135 136

Comments to this Manuals

No comments

Eaton SPI9000 User Manual Page 55

Comments to this Manuals

Related products and manuals for Rotary hammers Eaton SPI9000