Eaton SPI9000 User Manual download pdf (Page 75)

SPI9000 Inverter Unit FR4 – FR8 User Manual

MN04004003E

For more information visit: www.EatonElectrical.com 5-27

April 2006

Figure 5-25: HMI Acknowledge Timeout

Number of retries to receive HMI acknowledgement (P6.7.4)

With this parameter you can set the number of times the drive will try to receive

acknowledgement if it does not receive acknowledgement within the acknowledgement time

(P6.7.3) or if the received acknowledgement is faulty.

You can change value through the same procedure as for P6.7.3 (see above).

Note: Changes to P6.7.3 and P6.7.4 become effective after the next start-up.

System info

In the System info submenu (S6.8) you can ﬁnd inverter-related hardware and software

information.

You can enter the System info submenu by pressing Menu Button Right. You can now

browse the submenu pages with the Browser buttons.

Total Counters

The Total counters menu (S6.8.1) contains information on the inverter operation times i.e. the

total number of MWh, operation days and operation hours. Unlike the counters in the Trip

counters menu, these counters cannot be reset.

Note: The Power On time counter (days and hours) runs always when the power is on.

Table 5-11: Counter Pages

Page Counter

C6.8.10.1 MWh counter

C6.8.10.2 Operation day counter

C6.8.1.3. Operation hour counter

HMI ACK timeout

P6.7.3

HMI ACK timeout

200ms

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 91 92

No comments

Eaton SPI9000 User Manual Page 75