Eaton SPI9000 User Manual download pdf (Page 21)

SPI9000 Inverter Unit FR4 – FR8 User Manual

MN04004003E

For more information visit: www.EatonElectrical.com 2-1

April 2006

Chapter 2 — Mounting

Dimensions

The inverter can be mounted in either a vertical or horizontal position on a wall or on the

back plane of a cubicle. Enough space must be reserved around the inverter to ensure

sufﬁcient cooling, see Figure 2-6. You must follow the minimum dimensions for installation,

see Tables 2-6 and 2-7. Also make sure that the mounting plane is relatively even.

The inverter is ﬁxed with four screws (or bolts, depending on the unit size). The dimensions

for installation are presented in Figure 2-6 and Table 2-6.

Lift units bigger than FR7 out of the package using a jib crane. Ask Eaton or your local

distributor for information on how to lift the unit safely.

The following pages show the dimensions for SPI9000 inverters with a default enclosure in

Figure 2-1, and with ﬂange mounting in Figures 2-2 and 2-4. Dimensions for the opening

needed in ﬂange mounting are given in Tables 2-3 and 2-5.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 91 92

No comments

Eaton SPI9000 User Manual Page 21