Instruction Manual IM01005019E - Rev.5
Effective November 2013
Eaton www.eaton.com 3
Eaton SPD Series
Surge Protective Device for Integrated Units
6. Select the correct wiring diagram for the SPD you are install-
ing. You must refer to this diagram while wiring the SPD.
See Figures 6, 7, 8, and 9, on page 4.
Figure 3. Bus Connection
Figure 4. Dimensions for 50-200kA Units
MOUNTING 8.80 [223.5]
TERMINALS 8.74 [222.0]
4.66 [118.4]
MTG 3.42 [86.9]
3.42 [86.9]
9.50 [241.3]
5.40 [137.0]
1.71 [43.5]
3.42 [86.9]
4.85 [123.1]
5.78 [146.8]
4X MTG 2.52 [63.9]
4X Ø.218 MOUNTING
4X #10-32 X .38 DP
BRASS TERMINALS
Figure 5. Dimensions for 250-400kA Units
2.015 [51.2] 2.015 [51.2]
4.40 [111.8]
MOUNTING 8.80 [223.5]
TERMINALS 8.74 [222.0]
4.66 [118.4]
MTG 3.42 [86.9]
3.42 [86.9]
.04 [1.0]
9.50 [241.3]
5.40 [137.0]
.95 [24.0]
.26 [6.7]
3.42 [86.9]
2.52 [64.0]
3.45 [87.7]
BUS .34 [8.5]
4X MTG .19 [4.8]
4X Ø.218 MOUNTING
4X #10-32 X .38 DP
BRASS TERMINALS
3X Ø.221
BUS MTG
Comments to this Manuals