Eaton Powerware 5130 Rack/Tower UPS 1250-3000 VA User's Guide download pdf (Page 30)

INSTALLATION

EATON Powerware

5130 Rack/Tower UPS (1250–3000 VA) User’s Guide S 164201730 Rev 2

www.powerware.com

Installing the Rail Kit

CAUTION

The UPS and EBM are heavy (see page 52). A minimum of two people are required to lift the

cabinets into the rack.

NOTE Mounting rails are required for each UPS and EBM cabinet. If mounting rails are not

already installed in your rack, contact your local distributor to order rail kits.

To install the rail kit:

1. Adjust the rail size for the depth of your rack.

2. Select the proper holes in the rail for positioning the UPS in the

desired location in the rack.

3. Using two M5 washers and two M5 screws, attach the rail to the

rear of the rack (see Figure 4).

4. Secure the rail to the front of the rack with two M5 washers and

two M5 screws.

5. Repeat Steps 3 and 4 for the other rail.

Figure 4. Installing the Rail Kit

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 73 74

No comments

Eaton Powerware 5130 Rack/Tower UPS 1250-3000 VA User's Guide Page 30