Eaton 93E Installation Guide Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
P-164000427 SMALL and LARGE BATTERY CABINET 3
Revision 2 User's and Installation Guide
WARNING
To reduce the risk of fire or electric shock, install this battery cabinet in a
temperature and humidity controlled, indoor environment, free of conductive
contaminants. Ambient temperature must not exceed 40 °C (104 °F). Do not operate
near water or excessive humidity (95 % maximum). The system is not intended for
outdoor use.
Ensure all power sources are disconnected before performing installation or service. Power
may come from multiple sources.
Ensure
system grounding/PE continuity when undertaking installation
or
service.
Batteries
can
present
a risk of
electrical shock
or burn from high
short-circuit current.
ELECTRIC ENERGY HAZARD.
Do not
attempt
to alter any
battery
wiring or
connectors.
Attempting
to alter wiring can
cause injury.
Do not
open
or
mutilate batteries. Released electrolyte
is harmful to the skin and
eyes.
It may be
toxic.
IMPORTANT:
the
battery
may
consist
of
multiple
parallel
strings, disconnect
all
strings
before installation.
CAUTION
Installation
or
servicing should
be
performed
by
qualified
service personnel
knowledgeable
of
batteries
and required
precautions.
Keep
unauthorized
personnel
away
from
batteries. Consider
all
warnings, cautions,
and
notes before installing
or
replacing
batteries.
DO NOT DISCONNECT
the
batteries while
the UPS is in Battery
mode.
Replace batteries
with the
same number
and type of
batteries
as
originally installed
.
Disconnect
the
charging source
prior to
connecting
or
disconnecting terminals.
Determine
if the
battery circuit
is
inadvertently grounded.
If it is,
remove
the
source
of
the
ground. Contacting
any part of a
grounded battery
can
cause
a risk
of
electric shock. An
electric shock
is
less
likely if you
disconnect
the
grounding
connection before
you
work
on the
batteries.
Proper
disposal
of
batteries
is required. Refer to local
codes
for
disposal
requirements.
Do not
dispose
of
batteries
in a fire.
Batteries
may
explode when exposed
to
flame.
Keep the door
closed
and front
panels installed
to
ensure
proper
cooling
airflow
and
to
protect personnel
from
dangerous voltages inside
the
unit.
Do not install or
operate
the UPS
system close
to gas or
electric
heat
sources.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Comments to this Manuals

No comments