Eaton 93E Installation Guide download pdf (Page 16)

P-164000427 SMALL and LARGE BATTERY CABINET 11

Revision 2 User's and Installation Guide

Select

the cable routing out of

different options

and route the

cables

to the

dedicated

connectors

inside UPS

cabinet. Terminals are located under the circuit breaker and

are marked with +, - and a protecting earth designators.

6. Apply cable glands and/or plastic

pass-through

collars

accordingly.

WARNING

Make sure all power sources are disconnected before next steps.

Connect the power cables and signal wires to the

UPS. No signal wires are connected to

93E UPS.

Battery installation is to be done on-site by authorized and trained service personnel. Batteries are

to be installed on the shelves according to the following picture. Ensure you find a correct wiring

instruction included into the cabinet and follow it.

Figure 2 -4: B

attery mounting on the shelves

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

No comments

Eaton 93E Installation Guide Page 16