Eaton CRMA-00/04 Technical Information download pdf (Page 42)

42 Eaton RF-System - Help

connections established.

A connection that was established using manual routing will always be displayed as a black dotted

line

Only one connection with either automatic routing or manual routing may run out from a sensor

channel, never a mixed connection.

You can have MRF recalculate at any time a connection that was set up with manual routing. In

this manner, it loses its manually-entered path and the MRF attempts to calculate the routing

under consideration of the reception quality.

If you need to draw out the manual routing from a multi-channel sensor, you must select the

respective channel after pressing ENTER. The possibility that you have to select the sensor

channel multiple times (for each of the resulting connections) is possible if multiple connections

are set up as a result of the drawn-out routings.

Replace device

Using this function you can replace an existing device in the project by a new one. (f.E. if a device

is defect). You have to scan the new device first. It has to be the same type of device like the old

one.

Then you can start this function and follow the instructions on screen.

IMPORTANT!!! After clicking OK you should immediately click on the “Load” button or menu ->

actions -> load.

Background: The old device is being removed from the screen and replaced by the new one. In all

devices that had something to do with the old device the data entries are changed automatically.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 231 232

No comments

Eaton CRMA-00/04 Technical Information Page 42