Eaton CRMA-00/04 Technical Information download pdf (Page 150)

150 Eaton RF-System - Help

Overview MEP device

The MEP device is connected to an Eaton Smart Meter and transfers different values (total power,

total energy, present rate, rate 1, rate 2, rate 3, rate 4) to a Room-Manager, Home-Manager or

communication interface. It contains also 4 rate outputs and 10 general outputs which can be

assigned to actuators.

The MEP device must be connected with an Eaton Smart Meter therewith you can scan and

configure it with the MRF software.

Connection:

After the successful configuration and the activation of the option “The MEP device has been

configured and can now used” a connection to another device can be drawn.

Following connection possibilities are maximal available:

Tariff outputs or general outputs can be assigned to one or more actuators, Room-Manager inputs,

Home-Manager data points and communication interface data points.

The total energy value and the rate 1-4 channels can be assigned to Room-Manager inputs,

Home-Manager data points and communication interface data points.

Info to the different settings:

see MEP device - Total Energy

see MEP device - Tariff Energy

see MEP device - Tariff outputs

see MEP device - General outputs

see MEP device - General

see Room-Manager Energy - Input MEP

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 231 232

No comments

Eaton CRMA-00/04 Technical Information Page 150