Eaton Ellipse ECO 1200VA User Manual download pdf (Page 6)

614-06803-00

ENGLISH

Operating conditions

l This product is an Uninterruptible

Power Supply (UPS) for computers

and their peripherals, television

sets, stereo systems and video

recorders... It must not be used to

supply other electrical equipment

(lighting, heating, household

appliances, etc.).

l UPS can be installed in

horizontal, vertical position, or

placed in Rack 2U (optional kit).

UPS connections

l Connect the UPS

to the

AC-power system via a wall outlet

with an earth connector, using the

supplied cord

for a UPS with

FR/DIN sockets or with the supply

cord of your computer for a UPS

with IEC sockets (see gure A).

l Plug critical equipment

(computer, monitor, modem,

etc.) into the outlets

providing

battery backup power and surge

protection (see gure B), taking

care not to exceed the rated current

indicated in amperes.

l Other devices (printer, scanner,

fax, etc.) can be connect to the

ltered outlets

that provide

surge protection (see gure B). The

ltered outlets are not backed up

by battery power in the event of a

power outage.

l Optional Internet modem /

Network connection:

A modem or Ethernet data line

can be protected against surges by

connecting it via the UPS. Connect

the existing device cable between

the wall outlet and the UPS, and

use a similar cable between the

UPS and the device, as indicated in

gure C (cable not supplied).

l Optional USB connection:

The UPS device can be connected

to the computer using the USB

cable

supplied.

The software is available on the

CD-ROM

or downloadable

from powerquality.eaton.com

(see gures D and F).

powerquality.eaton.com.

Master and EcoControl

outlets operating

procedure

In order to limit energy

consumption of peripherals

(scanner, printer) in standby mode,

the Ellipse ECO is equipped

with EcoControl outlets that are

dependent on the Master outlet.

When the main application

supplied by the Master outlet

(computer) is shut down,

the EcoControl outlets are

autonomy after it has been charged

for 8 hours. It is recommended that

the UPS be permanently connected

to the AC power supply to ensure

the best possible autonomy.

l Switching-on the UPS: press

button

for about 1 second.

l Filtered outlets

without

battery backup: Equipment

connected to these outlets is

supplied as soon as the AC cord

is plugged in. They are not affected

by button

l Battery backup outlets

Equipment connected to these

outlets is supplied as soon as

button

turns green (see gure

E). These outlets can be turned on

even if the UPS is not connected to

AC power (button

ashes).

l AC-power disturbance: If AC

power is disturbed or fails, the UPS

continues to operate on battery

power. Button

ashes green.

In normal mode, the audio alarm

beeps every ten seconds, then

every three seconds when the end

of battery backup time is near. In

silent mode (see the section on

settings), the audio alarm simply

beeps once when the UPS transfers

to battery power.

l If the power outage lasts longer

than the battery backup time, the

UPS shuts down and automatically

restarts when power is restored.

Following a complete discharge, a

few hours are required to recharge

the battery back to full backup time.

l To save battery power, it is possible

to press button

to cut the supply

of power to the devices connected

to the battery backup outlets.

l Lightning protection: All outlets,

whether backed up or simply

ltered, include surge protection,

whatever the position of button

l Shutdown of the battery backup

outlets

: Press button

for

more than two seconds.

Ellipse 1200 / 1600Ellipse 500 / 650 / 800

13 13

automatically deactivated and the

peripherals shut down.

This function (deactivated by

default) is validated and congured

using the conguration tool

integrated in the software.

Note: When the function is

activated, do not connect critical

applications to EcoControl

outlets.

Threshold setup

A default setup ensures the correct

operation of the EcoControl

function. However, depending

on the consumption of the main

load, the trigger threshold of

the EcoControl function may

have to be modied using the

conguration software supplied

with the UPS:

l First, make sure that the function

is activated in the "EcoControl

Function" tab of the conguration

tool.

l If the peripherals connected

to the EcoControl outlets do not

switch off when the main load is

not in normal operation (ex: when

in standby mode), the detection

threshold value must be set to

High.

l If the rated consumption level

of the main load is low and the

EcoControl outlets shut down

when the main load is operating

normally, the detection threshold

value must be set to Low.

Operation

: Filtered outlets.

: Battery backup outlets.

: LED ON indicate that surge

protection is active

: LED ON indicate a UPS fault.

: ON/OFF button for the battery

backup outlets.

: Protection circuit breaker.

l Battery charge: The UPS

charges the battery as soon as it is

connected to the AC outlet, whether

button

is pressed or not. When

used for the rst time, the battery

will only provide its maximum

614-06803-00.indd 6 10/12/2010 11:15:08

1 2 3 4 5 6 7

Comments to this Manuals

No comments

Eaton Ellipse ECO 1200VA User Manual Page 6

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) Eaton Ellipse ECO 1200VA